View MAX314_606085.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

19-0420; Rev 2; 7/02
10, Quad, SPST, CMOS Analog Switches
General Description
Maxim's MAX312/MAX313/MAX314 analog switches feature low on-resistance (10 max) and 1.5 on-resistance matching between channels. These switches conduct equally well in either direction. They offer low leakage over temperature (2.5nA at +85C). Low power consumption and ESD tolerance greater than 2000V per Method 3015.7 are guaranteed. The MAX312/MAX313/MAX314 are quad, singlepole/single-throw (SPST) analog switches. The MAX312 is normally closed (NC), and the MAX313 is normally open (NO). The MAX314 has two NC switches and two NO switches. All three devices operate from a single supply of +4.5V to +30V or from dual supplies of 4.5V to 20V.
____________________________Features
o Pin Compatible with DG411/DG412/DG413 o Low On-Resistance (6.5 typical) o Guaranteed RON Match Between Channels (1.5 max) o Guaranteed RON Flatness over Specified Signal Range (2 max) o Guaranteed ESD Protection > 2000V per Method 3015.7 o Crosstalk > 96dB at 20kHz o Single-Supply Operation: +4.5V to +30V Dual-Supply Operation: 4.5V to 20V o Rail-to-Rail(R) Signal Handling
MAX312/MAX313/MAX314
________________________Applications
Test Equipment Communication Systems PBX, PABX Systems Audio Signal Routing Avionics Sample-and-Hold Circuits Data Acquisition Systems
______________Ordering Information
PART MAX312CPE MAX312CSE TEMP RANGE 0C to +70C 0C to +70C PIN-PACKAGE 16 Plastic DIP 16 Narrow SO
Rail-to-Rail is a registered trademark of Nippon Motorola Ltd.
MAX312CUE 0C to +70C 16 TSSOP MAX312C/D 0C to +70C Dice* MAX312EPE -40C to +85C 16 Plastic DIP MAX312ESE -40C to +85C 16 Narrow SO MAX312EUE -40C to +85C 16 TSSOP MAX312MJE -55C to +125C 16 CERDIP** Ordering Information continued at end of data sheet. * Contact factory for dice specifications. **Contact factory for availability.
_____________________Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
IN1 1 COM1 2 NC1 3 V- 4 GND 5 NC4 6 COM4
7
16 IN2 15 COM2 14 NC2 13 V+
IN1 1 COM1 2 NO1 3 V- 4 GND
5
16 IN2 15 COM2 14 NO2 13 V+
IN1 1 COM1 2 NO1 3 V- 4 GND
5
16 IN2 15 COM2 14 NC2 13 V+
MAX312
12 VL 11 NC3 10 COM3 9
MAX313
12 VL 11 NO3 10 COM3 9
MAX314
12 VL 11 NC3 10 COM3 9
NO4 6 COM4 7 IN4 8
NO4 6 COM4 7 IN4 8
IN4 8
DIP/SO/TSSOP
SO/MAX312 LOGIC SWITCH 0 1 ON OFF
IN3
IN3
IN3
DIP/SO/TSSOP
MAX313 LOGIC SWITCH 0 1 OFF ON
DIP/SO/TSSOP
LOGIC 0 1 MAX314 SWITCHES 1, 4 OFF ON SWITCHES 2, 3 ON OFF
SWITCHES SHOWN FOR LOGIC "0" INPUT
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
10, Quad, SPST, CMOS Analog Switches MAX312/MAX313/MAX314
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to GND V+ ...........................................................................-0.3V to +44V V- ............................................................................+0.3V to -44V V+ to V-...................................................................-0.3V to +44V VL .....................................................(GND - 0.3V) to (V+ + 0.3V) All Other Pins (Note 1) ................................(V- - 2V) to (V+ + 2V) or 30mA (whichever occurs first) Continuous Current (COM_, NO_, NC_).........................100mA Peak Current (COM_, NO_, NC_) ...................................300mA Continuous Power Dissipation (TA = +70C) Plastic DIP (derate 10.53mW/C above +70C) ..........842mW Narrow SO (derate 8.70mW/C above +70C) ............696mW CERDIP (derate 10.00mW/C above +70C) ...............800mW TSSOP (derate 6.7mW/C above +70C) ....................457mW Operating Temperature Ranges MAX31_C_ ..........................................................0C to +70C MAX31_E_ .......................................................-40C to +85C MAX31_M_.....................................................-55C to +125C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current rating.
ELECTRICAL CHARACTERISTICS--Dual Supplies
(V+ = 15V, V- = -15V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER ANALOG SWITCH Analog Signal Range VCOM_, VNO_, VNC_ RON (Note 3) TA = +25C TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN C, E to TMAX M TA = +25C C, E 10V TA = TMIN to TMAX M TA = +25C TA = TMIN C, E to TMAX M -0.5 -2.5 -40 -0.5 -2.5 -40 -1 -5 -100 -0.04 -0.02 -0.02 0.2 C, E M 0.3 V6.5 V+ 10 9 15 1.5 3 2 4 0.5 2.5 40 0.5 2.5 40 1 5 100 nA nA nA V SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
On-Resistance On-Resistance Match Between Channels (Note 4) On-Resistance Flatness (Note 5) Off Leakage Current (NO_ or NC_) (Note 6) COM Off Leakage Current (Note 6) COM On Leakage Current (Note 6)
ICOM = 10mA, VNO_ or VNC_ = 10V ICOM = 10mA, VNO_ or VNC_ = 10V
TA = TMIN to TMAX
RON
ICOM = 10mA, RFLAT(ON) VNO_ or VNC_ = -5V, 0V, 5V INO INC VCOM = 10V, VNO_ or VNC_ = 10V VCOM = 10V, VNO_ or VNC_ =
ICOM(ON)
VCOM = 10V, VNO_ or VNC_ = 10V
2
_______________________________________________________________________________________
INC(OFF)
10, Quad, SPST, CMOS Analog Switches
ELECTRICAL CHARACTERISTICS--Dual Supplies (continued)
(V+ = 15V, V- = -15V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER LOGIC INPUT Input Current with Input Voltage High Input Current with Input Voltage Low POWER SUPPLY Power-Supply Range Positive Supply Current I+ All channels on or off, VIN = 0V or 5V, V+ = 16.5V V- = -16.5V All channels on or off, VIN = 0V or 5V, V+ = 16.5V V- = -16.5V All channels on or off, VIN = 0V or 5V, V+ = 16.5V V- = -16.5V All channels on or off, VIN = 0V or 5V, V+ = 16.5V V- = -16.5V Figure 2, VCOM = 10V Figure 2, VCOM = 10V TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX 4.5 -1 -5 -1 -5 -1 -5 -1 -5 -0.0001 0.0001 0.0001 0.0001 20.0 1 A 5 1 A 5 1 A 5 1 A 5 V IINH IINL IN_ = 2.4V, all others = 0.8V IN_ = 0.8V, all others = 2.4V -0.500 -0.500 0.005 0.005 0.500 0.500 A A SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
MAX312/MAX313/MAX314
Negative Supply Current
I-
Logic Supply Current
IL
Ground Current DYNAMIC Turn-On Time Turn-Off Time
IGND
tON tOFF
TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX 1
70 65
225 275 185 235
ns ns
Break-Before-Make Time Delay
tD
MAX314 only, Figure 3, TA = +25C RL = 300, CL = 35pF CL = 1.0nF VGEN = 0V, RGEN = 0, Figure 4 RL = 50, CL = 5pF, f = 1MHz, Figure 5 RL = 50, CL = 5pF, f = 1MHz, Figure 6 f = 1MHz, Figure 7 f = 1MHz, Figure 7 f = 1MHz, Figure 7 TA = +25C
5
ns
Charge Injection (Note 3)
VCTE
-30
20
30
pC
Off Isolation (Note 7)
VISO
TA = +25C
-65
dB
Crosstalk (Note 8) NC or NO Capacitance COM Off Capacitance On Capacitance
VCT C(OFF) C(COM) C(COM)
TA = +25C TA = +25C TA = +25C TA = +25C
-85 15 15 47
dB pF pF pF 3
_______________________________________________________________________________________
10, Quad, SPST, CMOS Analog Switches MAX312/MAX313/MAX314
ELECTRICAL CHARACTERISTICS--Single Supply
(V+ = 12V, V- = 0V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER ANALOG SWITCH Analog Signal Range Channel On-Resistance POWER SUPPLY Positive Supply Current I+ V+ = 13.2V all channels on or off, VIN = 0V or 5V VL = 5.5V all channels on or off, VIN = 0V or 5V VL = 5.5V all channels on or off, VIN = 0V or 5V Figure 2, VNO_ or VNC_ = 8V Figure 2, VNO_ or VNC_ = 8V MAX314 only, Figure 3 RL = 300, CL = 35pF Figure 4, CL = 1.0nF, VGEN = 0V, RGEN = 0V TA = +25C TA = TMAX TA = +25C TA = TMAX TA = +25C TA = TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C 5 95 -1 -5 -1 -5 -1 -5 100 -0.0001 0.0001 0.0001 1 A 5 1 A 5 1 A 5 325 425 175 225 VCOM_, VNO_, VNC_ RON (Note 3) ICOM = 10mA, VNC_ or VNO_ +10V TA = +25C TA = TMIN to TMAX 0 12.5 V+ 25 35 V SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
Logic Supply Current
IL
Ground Current DYNAMIC Turn-On Time (Note 3) Turn-Off Time (Note 3) Break-Before-Make Time Delay (Note 3)
IGND
tON tOFF
ns ns
tD
ns
Charge Injection (Note 3)
VCTE
TA = +25C
-5
pC
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 3: Guaranteed by design. Note 4: RON = RON max - RON min. Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note 6: Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25C. Note 7: Off isolation = 20log10 [VCOM / (VNC or VNO)], VCOM = output, VNC or VNO = input to off switch. Note 8: Between any two switches. Note 9: Leakage testing at single supply is guaranteed by testing with dual supplies.
4
_______________________________________________________________________________________
10, Quad, SPST, CMOS Analog Switches
__________________________________________Typical Operating Characteristics
(TA = +25C, unless otherwise noted.)
MAX312/MAX313/MAX314
ON-RESISTANCE vs. VCOM (BIPOLAR SUPPLIES)
MAX312-01
ON-RESISTANCE vs. VCOM AND TEMPERATURE
MAX312-02
ON-RESISTANCE vs. VCOM (SINGLE SUPPLY, V- = 0V)
A
17 15 RON () 13 11 9 7 5
A: V+, V- = 5V, B: V+, V- = 10V, C: V+, V- = 15V A
14 12 RON () 10 8 6 4
V+ = 15V, V+ = -15V
A: TA = +125C B: TA = +85C C: TA = +70C D: TA = +25C E: TA = -55C
100 RON ()
B C D
A: V+ = 2.7V B: V+ = 3.3V C: V+ = 5V D: V+ = 9V E: V+ = 12V F: V+ = 15V
A B C D E
B C
E
F
10
2 -15 -10 -5 0 VCOM (V) 5 10 15 -15 -10 -5 0 VCOM (V) 5 10 15
1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 VCOM (V)
ON-RESISTANCE vs. VCOM AND TEMPERATURE
MAX312-04
OFF LEAKAGE CURRENT vs. TEMPERATURE
MAX312 TOC05
ON LEAKAGE CURRENT vs. TEMPERATURE
V+ = 15V, V- = -15V, VCOM = 10V
MAX312 TOC06
24 22 20 18 16 RON () 14 12 10 8 6 4 2 0
V+ = 12V, V- = 0V
A B C D E
100 10 OFF LEAKAGE (nA) 1 0.1 0.01 0.001 0.0001
V+ = 15V, V- = -15V, VNC OR VNO = 10V VCOM = 10V
100 10 ON LEAKAGE (nA) 1 0.1 0.01 0.001 0.0001
A: TA = +125C B: TA = +85C C: TA = +70C D: TA = +25C E: TA = -55C 1 23 45 67 8 9 10 11 12 VCOM (V)
-50
-25
0
25
50
75
100
125
-50
-25
0
25
50
75
100
125
TEMPERATURE (C)
TEMPERATURE (C)
CHARGE INJECTION vs. VCOM
MAX312-07
SUPPLY CURRENT vs. TEMPERATURE
A: I+ = 16.5V B: I- = -16.5V 10 C: IL = 5.5V 1 0.1
A
MAX312 TOC08
40 30 20 VCTE (pc) 10 0 -10 -20 -30 -40
A: V+ = 15V, V- = -15V B: V+ = 12V, V- = 0V
A
100
I+, I-, IL (A)
B
0.01 0.001 0.0001 -75 -50 -25
B C
-14 -12-10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 VCOM (V)
0
25
50
75
100 125
TEMPERATURE (C)
_______________________________________________________________________________________
5
MAX312-03
19
16
1000
10, Quad, SPST, CMOS Analog Switches MAX312/MAX313/MAX314
____________________________Typical Operating Characteristics (continued)
(TA = +25C, unless otherwise noted.)
TOTAL HARMONIC DISTORTION vs. FREQUENCY
MAX312-09
FREQUENCY RESPONSE
-10 -20 DISTORTION (%) LOSS (dB) 1 .1 -30 -40 -50 -60 ON PHASE 2.5pF CAPACITOR (FOR REFERENCE ONLY) ON RESPONSE OFF ISOLATION
MAX312-10
0 -20 -40 -60 -80 -100 -120 10
DISTORTION (dB re carrier)
V+ = 15V V- = -15V 5VRMS SIGNAL 600 SOURCE AND LOAD
100 10
0
20 10 0 -10 -20 -30 -40 -50 -60 PHASE (degrees)
SIGNAL DISTORTION MEASUREMENT LIMITS
.01 .001 .0001
-70 -80 1 10 FREQUENCY (MHz) 100 300
100
1000
10000
100000
FREQUENCY (Hz)
______________________________________________________________Pin Description
PIN NAME MAX312 1, 8, 9, 16 2, 7, 10, 15 3, 6, 11, 14 -- -- -- 4 5 12 13 MAX313 1, 8, 9, 16 2, 7, 10, 15 -- 3, 6, 11, 14 -- -- 4 5 12 13 MAX314 1, 8, 9, 16 2, 7, 10, 15 -- IN2, IN4, IN3, IN2 COM1, COM4, COM3, COM2 NC1, NC4, NC3, NC2 NO1, NO4, NO3, NO2 NO1, NO4 NC3, NC2 VGND VL V+ Logic Level Inputs FUNCTION
Analog Signal Common Terminals
Analog Signal Normally Closed Terminals
-- 3, 6 11, 14 4 5 12 13
Analog Signal Normally Open Terminals Analog Signal Normally Open Terminals Analog Signal Normally Closed Terminals Negative Analog Supply Input (connect to GND for single-supply operation) Logic Level Ground Logic Supply Voltage Positive Analog Supply Input
6
_______________________________________________________________________________________
10, Quad, SPST, CMOS Analog Switches
__________Applications Information
Low-Distortion Audio
The MAX312/MAX313/MAX314, having very low RON and very low RON variation with signal amplitude, are well suited for low-distortion audio applications. The Typical Operating Characteristics show Total Harmonic Distortion (THD) vs. Frequency graphs for several signal amplitudes and impedances. Higher source and load impedances improve THD, but reduce off isolation. tors to a circuit board deemed "average"; that is, designed with isolation in mind, but not using strip-line or other special RF circuit techniques. For critical applications above 5MHz, use the MAX440, MAX441, and MAX442, which are fully characterized up to 160MHz.
MAX312/MAX313/MAX314
V+
Off Isolation at High Frequencies
In 50 systems, the high-frequency on-response of these parts extends from DC to above 100MHz with a typical loss of -2dB. When the switch is turned off, however, it behaves like a capacitor, and off isolation decreases with increasing frequency. (Above 300MHz, the switch actually passes more signal turned off than turned on.) This effect is more pronounced with higher source and load impedances. Above 5MHz, circuit board layout becomes critical, and it becomes difficult to characterize the response of the switch independent of the circuit. The graphs shown in the Typical Operating Characteristics were taken using a 50 source and load connected with BNC connecV+
NO_ COM_ Vg
V-
V-
Figure 1. Overvoltage Protection Using External Blocking Diodes
+5V LOGIC INPUT +3V 50% 0V t r < 20ns t f < 20ns SWITCH V COM1 INPUT t OFF IN1 VO SWITCH OUTPUT 0V t ON 0.9V0 0.9V0 LOGIC INPUT GND 0V VL COM1
+15V V+ NO1 OR NC1
MAX312 MAX313 MAX314
SWITCH OUTPUT VO RL 300 CL 35pF
V-15V
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES THAT HAVE THE OPPOSITE LOGIC SENSE.
REPEAT TEST FOR EACH SWITCH. FOR LOAD CONDITIONS, SEE Electrical Characteristics. CL INCLUDES FIXTURE AND STRAY CAPACITANCE. RL VO = VCOM RL + RON
(
)
Figure 2. Switching-Time Test Circuit
_______________________________________________________________________________________
7
10, Quad, SPST, CMOS Analog Switches MAX312/MAX313/MAX314
LOGIC INPUT
+3V 50% 0V VCOM1 = +10V VCOM2 = +10V
+5V VL COM_ COM_ IN_ 0.9V02 LOGIC INPUT GND
+15V V+
MAX314
NO_ NC_ RL2 VO2 CL2 RL1
VO1 CL1
SWITCH OUTPUT 1 (VO1) SWITCH OUTPUT 2 (VO2)
0.9V01 0V
V-15V
0V
tD
tD
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL = 300 CL = 35pF
Figure 3. Break-Before-Make Test Circuit (MAX314 only)
MAX312 MAX313 MAX314
RGEN
+5V VL COM
+15V V+ VO NC OR NO CL IN VVO VIN
VO
V GEN GND
OFF
ON
OFF
-15V VIN = +3V
VIN
OFF
ON Q = (V O )(C L )
OFF
VIN DEPENDS ON SWITCH CONFIGURATION; INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
Figure 4. Charge Injection Test Circuit
8
_______________________________________________________________________________________
10, Quad, SPST, CMOS Analog Switches MAX312/MAX313/MAX314
C SIGNAL GENERATOR 0dBm
+15V
+5V
MAX312 MAX313 MAX314
SIGNAL GENERATOR 0dBm 0V, 2.4V
C
+15V
+5V
MAX312 MAX313 MAX314
N01 IN2 0V, 2.4V 50
V+ COM
VL
V+ COM1 IN1
VL
IN ANALYZER RL -15V COM NC OR NO GND VC
0V, 2.4V N02 GND RL -15V COM2 VC
ANALYZER
NC
Figure 5. Off-Isolation Test Circuit
Figure 6. Crosstalk Test Circuit
C
+15V
+5V
MAX312 MAX313 MAX314
C
+15V
+5V
MAX312 MAX313 MAX314
V+ COM
VL CAPACITANCE METER IN
V+ COM
VL
IN 0V or 2.4V f = 1MHz NC OR NO
CAPACITANCE METER NC OR NO f = 1MHz GND VC
0V or 2.4V
GND
V-
C
-15V
-15V
Figure 7. Channel-Off Capacitance Test Circuit
Figure 8. Channel-On Capacitance Test Circuit
_______________________________________________________________________________________
9
10, Quad, SPST, CMOS Analog Switches MAX312/MAX313/MAX314
Ordering Information (continued)
PART MAX313CPE MAX313CSE MAX313CUE MAX313C/D MAX313EPE MAX313ESE MAX313EUE MAX313MJE MAX314CPE MAX314CSE MAX314CUE MAX314C/D MAX314EPE MAX314ESE MAX314EUE MAX314MJE TEMP. RANGE 0C to +70C 0C to +70C 0C to +70C 0C to +70C -40C to +85C -40C to +85C -40C to +85C -55C to +125C 0C to +70C 0C to +70C 0C to +70C 0C to +70C -40C to +85C -40C to +85C -40C to +85C -55C to +125C PIN-PACKAGE 16 Plastic DIP 16 Narrow SO 16 TSSOP Dice* 16 Plastic DIP 16 Narrow SO 16 TSSOP 16 CERDIP** 16 Plastic DIP 16 Narrow SO 16 TSSOP Dice* 16 Plastic DIP 16 Narrow SO 16 TSSOP 16 CERDIP**
VGND V+ VL 0.140" (3.56mm)
___________________Chip Topography
COM1 IN1 IN2 COM2
A
D
B
C
* Contact factory for dice specifications. **Contact factory for availability.
COM4 IN4
IN3 COM3
0.085" (2.16mm)
MAX312 PIN A B C D NAME NC1 NC4 NC3 NC2
MAX313 PIN A B C D NAME NO1 NO4 NO3 NO2
MAX31 MAX314 PIN A B C D NAME NO1 NO4 NC3 NC2
TRANSISTOR COUNT: 100 SUBSTRATE CONNECTED TO V+
10
______________________________________________________________________________________
10, Quad, SPST, CMOS Analog Switches
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)
TSSOP.EPS
MAX312/MAX313/MAX314
______________________________________________________________________________________
PDIPN.EPS
11
10, Quad, SPST, CMOS Analog Switches MAX312/MAX313/MAX314
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)
CDIPS.EPS
INCHES DIM A A1 B C e E H L MAX MIN 0.053 0.069 0.004 0.010 0.014 0.019 0.007 0.010 0.050 BSC 0.150 0.157 0.228 0.244 0.016 0.050 MILLIMETERS MAX MIN 1.75 1.35 0.25 0.10 0.49 0.35 0.19 0.25 1.27 BSC 3.80 4.00 5.80 6.20 0.40 1.27
N
E
H
VARIATIONS:
1
INCHES
MILLIMETERS MIN 4.80 8.55 9.80 MAX 5.00 8.75 10.00 N MS012 8 AA 14 AB 16 AC
TOP VIEW
DIM D D D
MIN 0.189 0.337 0.386
MAX 0.197 0.344 0.394
D A e B A1 L C 0 -8
FRONT VIEW
SIDE VIEW
PROPRIETARY INFORMATION TITLE:
PACKAGE OUTLINE, .150" SOIC
APPROVAL DOCUMENT CONTROL NO. REV.
21-0041
B
1
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2002 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
SOICN .EPS

▲Up To Search▲

Price & Availability of MAX314

	To Download MAX314 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .